Mechanical Properties of Concrete with Ceramic Waste Aggregate

Authors

  • D. Gopinath Department of Civil and Structural Engineering, Annamalai University, Annamalai Nagar, Tamil Nadu, India
  • R. M. Senthamarai Department of Civil and Structural Engineering, Annamalai University, Annamalai Nagar, Tamil Nadu, India

DOI:

https://doi.org/10.51983/tarce-2012.1.2.2188

Keywords:

Concrete, Ceramic Waste, Mechanical Properties

Abstract

Concrete prepared using ceramic waste as aggregate is comparable to conventional concrete prepared using HBG metal. Compressive strength, split tensile strength, flexural strength and modulus of elasticity of concrete with ceramic waste aggregate were studied. Compressive strength of the concrete with ceramic waste aggregate was compared to conventional concrete. Regression equations are proposed for predicting properties of concrete with ceramic waste aggregate

References

S. P. McBride, A.Shukla and A. Bose, “Processing and characterization of a lightweight concrete using cenospheres,” Journal of Materials Science, Vol. 37, pp. 4217 – 4225, 1988.

R. M. Senthamarai and D. P. Manoharan, “Concrete with Ceramic Waste Aggregate,” Elsevier Jnl. of Cement and Concrete Composites, Vol. 27, No. 9 &10, pp. 913, 2005.

M. S. Mashitah, C. C. Kin and A. H. Badorul, “Recycling of Homogenous Ceramic Tiles for the Production of Concrete Block,” Proc. International Symposium on Environmental Management: Hazardous-Environmental Management Toward Sustainability, pp. 22- 23, Thailand, pp. 54-62, September 2005.

V. L. Lopez, B. Llamas, A. Juan, J. M. Moran and I. Guerra, “Ecoefficient Concretes: Impact of the Use of White Ceramic Powder on the Mechanical Properties of Concrete,” Jl. of Biosystems Engineering, Vol. 96, No. 4, pp. 559–564, 2007.

C. M. Martínez, M. I. G. Romero, J. Pozo, and A. J. Valdés “Use of Ceramic Wastes In Structural Concretes,” Proc.1st Spanish National Conference on Advances in Materials Recycling and Eco – Energy Madrid, pp. 137-139, November 2009.

V. M. Reddy, “Investigations on stone dust and ceramic scrap as aggregate replacement in concrete,” Intl. Jl. of Civil and Structural Engg., Vol. 1, No. 3, pp. 661-666, 2010.

T. Sekar, N. Ganesan and N. V. M. Nampoothiri, “Studies on Strength Characteristics on Utilization of Waste Materials as Coarse Aggregate in Concrete,” Intl. Jl. of Engineering and Technology, Vol. 3, No. 7, pp. 5436-5440, 2011. [8] G. Murali, R. Saravanakumar, C. Balaji, R. Muthuraman, V. SreeKavitha and S. Archana, “Experimental Investigation on Concrete with Different Waste Stone as a Aggregate,” Intl. Jl. of Engineering and Technology, Vol. 2, No.3, pp. 253-256.

Downloads

Published

05-11-2012

How to Cite

Gopinath, D., & Senthamarai , R. M. (2012). Mechanical Properties of Concrete with Ceramic Waste Aggregate. The Asian Review of Civil Engineering, 1(2), 10–13. https://doi.org/10.51983/tarce-2012.1.2.2188

Issue

Vol. 1 No. 2 (2012): July-December 2012

Section

Articles

License

Copyright (c) 2012 The Research Publication

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.