Passive Cooling Retrofit Strategies for Reducing Energy Demand in a Residential Building in Karachi, Pakistan
DOI:
https://doi.org/10.70112/tarce-2026.15.1.4300Keywords:
Retrofit, Passive Cooling, Residential, Solar Access, Ventilation, GlazingAbstract
Buildings are the biggest electricity consumers and carbon emitters, and space cooling and heating are responsible for a substantial amount of the energy usage. In developing nations, the energy efficiency of existing residential buildings is often poor owing to poor thermal design and the prevalence of energy-intensive cooling systems, which provide immense potential for improvement through retrofitting. This paper describes an Autodesk Ecotect based retrofit analysis of a residential building in Karachi, Pakistan, using passive cooling systems as a case study. A reference building model was created and analyzed from 1 January 2025 to 31 December 2025 to determine the annual heating and cooling demand, solar access, passive heat gain terms, ventilation-related gains, and indoor air temperature. Various retrofitting options were explored, such as argon gas-filled double glazing with solar control film, improved natural ventilation with wind catcher and cross ventilation, green roofs, insulation of building envelopes, exterior reflective coatings with different reflectance values, and indirect nocturnal radiant cooling. The analysis indicates that substitution of single glazing with tinted double glazing resulted in a 12.17% reduction in annual thermal loads with improved indoor comfort conditions. In addition, energy retrofits at the appliance level, using efficient lighting and appliances, decreased the monthly electricity consumption from 539 kWh to 390 kWh, resulting in a monthly savings of 149 kWh. The results show that combining passive envelope and ventilation retrofits with efficient appliances can be an effective way to reduce cooling-driven energy demand and improve thermal comfort in residential buildings in hot climates.
References
[1] Erdoğdu, F. Dayi, A. Yanik, F. Yildiz, and F. Ganji, “Innovative Solutions for Combating Climate Change: Advancing Sustainable Energy and Consumption Practices for a Greener Future,” Sustainability (Switzerland), vol. 17, no. 6, Mar. 2025. DOI: https://doi.org/10.3390/su17062697.
[2] K. Sovacool, “The importance of comprehensiveness in renewable electricity and energy-efficiency policy,” Energy Policy, vol. 37, no. 4, pp. 1529–1541, 2009. DOI: https://doi.org/10.1016/j.enpol.2008.12.016.
[3] L. Yang, H. Yan, and J. C. Lam, “Thermal comfort and building energy consumption implications – A review,” Applied Energy, vol. 115, pp. 164–173, 2014. DOI: https://doi.org/10.1016/j.apenergy.2013.10.062.
[4] Kajjoba, R. Wesonga, J. D. Lwanyaga, H. Kasedde, P. W. Olupot, and J. B. Kirabira, “Assessment of thermal comfort and its potential for energy efficiency in low-income tropical buildings: a review,” Sustainable Energy Research, vol. 12, no. 1, p. 25, 2025. DOI: https://doi.org/10.1186/s40807-025-00169-9.
[5] Citadini de Oliveira, I. Catão Martins Vaz, and E. Ghisi, “Retrofit strategies to improve energy efficiency in buildings: An integrative review,” Energy and Buildings, vol. 321, p. 114624, 2024. DOI: https://doi.org/10.1016/j.enbuild.2024.114624.
[6] H. Jain, “Critical insights into thermal comfort optimization and heat resilience in indoor spaces,” City and Built Environment, vol. 2, no. 1, p. 14, 2024. DOI: https://link.springer.com/article/10.1007/s44213-024-00038-z.
[7] Kajjoba, R. Wesonga, J. D. Lwanyaga, H. Kasedde, P. W. Olupot, and J. B. Kirabira, “Assessment of thermal comfort and its potential for energy efficiency in low-income tropical buildings: a review,” Sustainable Energy Research, vol. 12, no. 1, p. 25, 2025. DOI: https://doi.org/10.1186/s40807-025-00169-9.
[8] M. H. Elnabawi, E. Saber, and L. Bande, “Passive Building Energy Saving: Building Envelope Retrofitting Measures to Reduce Cooling Requirements for a Residential Building in an Arid Climate,” Sustainability (Switzerland), vol. 16, no. 2, Jan. 2024. DOI: https://doi.org/10.3390/su16020626.
[9] Chughtai, M. A. Uqaili, N. H. Mirjat, and F. U. Shaikh, “Diagnosis of Energy Crisis of Pakistan and Assessment of DSM as Viable Solution †,” Engineering Proceedings, vol. 46, no. 1, 2023. DOI: https://www.mdpi.com/2673-4591/46/1/35
[10] M. Bughio, M. S. Khan, W. A. Mahar, and T. Schuetze, “Impact of passive energy efficiency measures on cooling energy demand in an architectural campus building in Karachi, Pakistan,” Sustainability (Switzerland), vol. 13, no. 13, Jul. 2021. DOI: https://www.mdpi.com/2673-4591/46/1/35
[11] Y. Boutahri and A. Tilioua, “Machine learning-based predictive model for thermal comfort and energy optimization in smart buildings,” Results in Engineering, vol. 22, p. 102148, 2024. DOI: https://doi.org/10.1016/j.rineng.2024.102148.
[12] R. Meziani and V. M. Joshima, “Advancing Sustainability in the Built Environment: A Bibliometric Review of Building Envelope Retrofitting on Energy Efficiency and Climate Adaptation,” Civil Engineering and Architecture, vol. 13, no. 6, pp. 4134–4147, Nov. 2025. DOI: https://www.hrpub.org/journals/article_info.php?aid=15458.
[13] M. Ibrahim, P. Biwole, F. Harkouss, F. Fardoun, and S. E. Ouldboukhitine, “Retrofitting Towards Net-Zero Energy Building Under Climate Change: An Approach Integrating Machine Learning and Multi-Objective Optimization,” Buildings, vol. 16, no. 3, 2026. DOI: https://doi.org/10.3390/buildings16030537.
[14] Kamel and A. M. Memari, “Residential Building Envelope Energy Retrofit Methods, Simulation Tools, and Example Projects: A Review,” Buildings, Jul. 2022. DOI: https://doi.org/10.3390/buildings12070954.
[15] K. Alexakis, S. Komninou, P. Kokkinakos, and D. Askounis, “Climate-Sensitive Building Renovation Strategies: A Review of Retrofit Interventions Across Climatic and Building Typologies,” Sep. 2025. DOI: https://www.mdpi.com/2071-1050/17/18/8187.
[16] Baset and M. Jradi, “Data-Driven Decision Support for Smart and Efficient Building Energy Retrofits: A Review,” Feb. 2025. DOI: https://doi.org/10.3390/asi8010005.
[17] S. Jia, Q. Weng, C. Yoo, H. Xiao, and Q. Zhong, “Building energy savings by green roofs and cool roofs in current and future climates,” npj Urban Sustainability, vol. 4, no. 1, Dec. 2024. DOI: https://doi.org/10.1038/s42949-024-00159-8.
[18] R. Ukey and A. C. Rai, “Envelope retrofits for enhancing thermal comfort in detached houses in hot semi-arid climatic conditions: A year-long monitoring and simulation study,” Building and Environment, vol. 257, p. 111536, 2024. DOI: https://doi.org/10.1016/j.buildenv.2024.111536.
[19] Y. Chen, J. Liu, J. Pei, X. Cao, Q. Chen, and Y. Jiang, “Experimental and simulation study on the performance of daylighting in an industrial building and its energy saving potential,” Energy and Buildings, vol. 73, pp. 184–191, 2014. DOI: https://doi.org/10.1016/j.enbuild.2014.01.030.
[20] M. A. Mohammed and I. Budaiwi, “Strategies for Reducing Energy Consumption in a Student Cafeteria in a Hot-Humid Climate: A Case Study,” Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 1, pp. 14–26, Mar. 2013. DOI: https://doi.org/10.13044/j.sdewes.2013.01.0002.
[21] M. Tahsildoost and Z. S. Zomorodian, “Energy retrofit techniques: An experimental study of two typical school buildings in Tehran,” Energy and Buildings, vol. 104, pp. 65–72, 2015. DOI: https://doi.org/10.1016/j.enbuild.2015.06.079.
[22] T. Ekström, R. Bernardo, and Å. Blomsterberg, “Cost-effective passive house renovation packages for Swedish single-family houses from the 1960s and 1970s,” Energy and Buildings, vol. 161, pp. 89–102, 2018. DOI: https://doi.org/10.1016/j.enbuild.2017.12.018.
[23] J. Yu, Y. Dong, T.-H. Wang, W.-S. Chang, and J. Park, “U-Values for Building Envelopes of Different Materials: A Review,” Buildings, vol. 14, no. 8, 2024. DOI: https://doi.org/10.3390/buildings14082434.
[24] Jain, “Critical insights into thermal comfort optimization and heat resilience in indoor spaces,” City and Built Environment, vol. 2, no. 1, p. 14, 2024. DOI: https://link.springer.com/article/10.1007/s44213-024-00038-z.
[25] T. Li et al., “A radiative cooling structural material,” Science, vol. 364, no. 6442, pp. 760–763, May 2019. DOI: https://doi.org/10.1126/science.aau9101.
[26] J. Mandal et al., “Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling,” Science, vol. 362, no. 6412, pp. 315–319, 2018. DOI: https://doi.org/10.1126/science.aat9513.
[27] E. Y. Sako et al., “Review: Thermal ceramic coatings as energy saving alternatives for high temperature processes,” International Journal of Applied Ceramic Technology, vol. 17, Sep. 2020. DOI: https://doi.org/10.1111/ijac.13606.
[28] Andric, A. Kamal, and S. G. Al-Ghamdi, “Efficiency of green roofs and green walls as climate change mitigation measures in extremely hot and dry climate: Case study of Qatar,” Energy Reports, vol. 6, pp. 2476–2489, Sep. 2020. DOI: https://doi.org/10.1016/j.egyr.2020.09.006.
[29] M. Alam, H. Jamil, J. Sanjayan, and J. Wilson, “Energy saving potential of phase change materials in major Australian cities,” Energy and Buildings, vol. 78, pp. 192–201, 2014. DOI: https://doi.org/10.1016/j.enbuild.2014.04.027.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Centre for Research and Innovation
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
